Credit Cards
We Accept All Major Credit Cards


Spray Foam Insulation

Does Spray Foam Insulation Cause Moisture Problems in Your Woodstock Home?

Spray foam insulation is an increasingly popular way of insulating Woodstock properties. That said, it’s not without its flaws, and many homeowners may wonder, “Does spray foam insulation cause moisture problems?” Anthem Insulation & Home, the best attic insulation company in Woodstock, Georgia, is here to explain.

What Is Spray Foam Insulation?

Spray foam insulation is a type of insulation that conveniently gets into awkward areas of attics and crawl spaces. Unlike insulation sheets, it provides a more full-coverage finished product. Spray foam insulation helps a property feel more comfortable with greater energy efficiency.

Installers must ensure that the spray foam adheres properly to achieve the best moisture protection. The insulation will not achieve its typical moisture-resistant seal if you’re using a poor-quality product, material, or installation technique. Working with a trusted professional is vital.

The Importance of Properly Installing Spray Foam Insulation for Your Woodstock Home

Spray foam insulation can’t sufficiently protect your house from moisture trouble if the installation is poor quality. This insulation type is excellent at keeping out moisture, but only if it has a properly installed air seal to provide temperature and moisture control.

In addition, it’s always ideal to have a professional install spray foam insulation, as some products contain isocyanates and can cause health problems for installers. Some of the primary dangers of spray foam insulation include the following:

  • Asthma
  • Breathing difficulties
  • Coughing
  • Irritated throat or skin
  • Chest pain
  • Fever
  • Extreme sickness

Although spray foam insulation is excellent to have in your home, leaving the installation to trained professionals who have the right equipment, protective gear, and knowledge will keep you and those in your house safe. 

The Importance of Humidity Control With Attic Encapsulation

Does spray foam insulation cause moisture problems? Proper installation and moisture management are vital to prevent issues with moisture. While a little bit of moisture isn’t a major concern, roof leaks and heavy rainstorms can negatively impact your property.

You can trust that your insulation will provide incredible protection against moisture and help keep your attic and other areas of your home dry, so long as it’s installed properly. Scheduling periodic inspections in Woodstock, GA, will also prevent moisture from getting inside.

Open-Cell Foam vs. Closed-Cell Foam

Open-cell foam insulation has open cells that allow water to pass through, while closed-cell foam insulation isn’t vapor permeable at all. While open-cell foam is an effective form of insulation, you’ll need to have an exhaust fan or some other type of circulation and ventilation to stop moisture concerns. Working with an insulation professional can help you decide which will work best for your property’s moisture problems.

Learn About Spray Foam Insulation and Woodstock Services With Anthem Insulation & Home

Now that Anthem Insulation & Home has answered, “Does spray foam insulation cause moisture problems?” you may consider scheduling an insulation service appointment for your Woodstock property. Learn more about spray foam insulation on basement walls, then call their business.

If you’re interested in exploring your insulation options in Woodstock, GA, connect with the team at Anthem Insulation & Home today!

Spray Foam Insulation

How Long Does Spray Foam Take to Dry in Woodstock, GA?

Spray foam is a popular insulation material due to its ability to expand quickly and fill small gaps. So, how long does spray foam take to dry?

Anthem Insulation & Home has the top spray foam insulation experts in Woodstock, GA, so they have detailed knowledge about the foam insulation curing process and its timeline, which they share below. 

How Does Spray Foam Insulation Work?

It helps to know how the insulating material works when determining how long it takes to dry. Spray foam acts as an effective air, sound, and moisture barrier for homes and commercial buildings. It offers outstanding benefits, including increased energy efficiency.

The material works by creating a chemical reaction between two components. When they mix as an insulation installer sprays them onto a surface, the foam immediately forms and expands. 

Installers use two forms of spray foam insulation. The first type of spray foam is the closed cell variety, which creates thicker insulation suitable for thermal protection and resistance to water and fire. Open-cell foam is more cost-effective and works better in hard-to-reach spots like attic corners. 

How Long Does it Take for Open-Cell and Closed-Cell Spray Foam Insulation to Cure in Woodstock?

So how long does spray foam take to dry?

It generally takes up to an hour for spray foam insulation to dry and loses its sticky texture from remaining moisture. The curing process to harden open-cell spray foam can take anywhere from eight to 24 hours. Since closed-cell spray foam is denser than the other form, it can take about 20 to 24 hours to completely dry and cure, even though it can become tack-free in as little as five minutes. 

What Factors Can Speed Up the Curing Process?

Several factors contribute to the drying speed of spray insulation foam. For instance, denser materials will take longer to cure. Other factors include:

  • Weather conditions: Extreme air temperatures and humidity will affect the spray’s porosity, strength, and ability to dry. It’s best to install spray foam insulation when temperatures range from 60 to 90 degrees. 
  • Ventilation: Though the foam will eventually dry, it needs moisture to facilitate the curing process. You can open windows or use fans to improve ventilation as the material dries.
  • Amount of spray foam on the surface: Spray foam insulation doesn’t require too many passes from the sprayer because the insulation will expand. The more you apply, the longer it will take to dry. 

Turn to Anthem Insulation & Home Today for Quality Foam Insulation Services in Woodstock

Now that you know the answer to “How long does spray foam take to dry?” you can trust the team at Anthem Insulation & Home to expertly install insulation to safeguard your Woodstock, GA, home against air leaks, moisture damage, and pests. They install closed-cell and open-cell spray foam insulation and are specialists in other materials as well, like fiberglass and mineral wool. Contact Anthem Insulation & Home in Woodstock for an appointment for spray foam insulation on your basement walls, attic, and other spaces. 

Spray Foam Insulation

Can You Use Spray Foam Insulation on Your Basement Walls in Woodstock?

If you’re in the process of refinishing your basement, you might be wondering, can you use spray foam insulation on basement walls? The answer is clear: yes, you can. 

When your basement receives adequate insulation, it helps your home’s overall energy efficiency, ensuring your home stays comfortable and preventing heat from entering during the hot summer months in Woodstock. 

What’s most important is that you have correctly installed insulation. Continue reading about the benefits of Woodstock’s professional spray foam insulation and how an insulated basement will benefit your home for years to come.

What Is Spray Foam Insulation?

Spray foam insulation is a type of insulation that also creates an air barrier. When applying spray foam to an area, it acts as a barrier sealing any floor, cracks, cavities, attics, or ceilings so there is little to no air movement. 

What’s even more noteworthy is that spray foam does not change shape or warp over time, which other insulations may do because of the heat that’s common in Woodstock. Instead, with spray foam, you get a nonpermeable barrier preventing air from coming in and out of the area in which it’s sprayed, helping your home maintain structural integrity and improve energy efficiency. 

Benefits of Spray Foam Insulation for Basements in Woodstock

Can you use spray foam insulation on basement walls? Yes, you can; there are numerous advantages to opting for spray foam insulation for your basement in Woodstock, GA. Spray foam insulation:

  • Prevents mold and mildew growth 
  • Helps reduce heat transfer and heat loss for a more comfortable home
  • Fills cracks & hard-to-reach corners
  • May lower energy bills
  • Provides soundproofing and stops air leakage

Woodstock Area Spray Foam Application 

If you’re ready to pursue spray foam insulation for your basement in Woodstock, GA, then you’ll want to hire a professional to complete your application. 

Since spray foam insulation requires specific ventilation requirements, it’s vital you let professionals handle the application to ensure a safe home. Furthermore, professionals will help you determine which type of spray foam, open-cell or closed-cell, is best for your basement’s needs.

What Are the Differences Between Closed-Cell and Open-Cell Spray Foam?

A closed-cell foam is denser and doesn’t expand as much as an open-cell foam. Open cell foam is lower density, and it can shift slightly with your home but offers excellent soundproofing.

Both foams create an air seal, but closed-cell is better for damp areas and offers a higher density. However, always speak with a professional for the best treatment for your basement in Woodstock. 

Choose Professional Installation With Anthem Insulation & Home

Instead of wondering, “Can you use spray foam insulation on basement walls?” rely on a team of experts for spray foam insulation application. Trust the friendly and preferred insulation professionals at Anthem Insulation & Home for premier spray foam insulation and various insulation services.

Get in touch with Anthem Insulation & Home to insulate your basement with a premier spray foam treatment today! Learn more today.

Spray Foam Insulation

Injection Foam vs. Spray Foam Insulation: What Are the Differences?

Many homeowners ask us the difference between injection foam vs. spray foam. Generally, injection foam does not expand, whereas spray foam expands depending on the open or closed-cell structure. If you’re looking to install or replace insulation in your home, work with the top insulation contractor in Cumming, GA

Injection Foam vs. Spray Foam Insulation

Below are the three main differences between injection and spray foam insulation.

1. Installation Method

Injection Foam

Injection foam installation involves injecting foam into walls, roof cavities, and closed spaces. As a significant benefit, existing walls don’t need demolishing before installation. Additionally, injection foam takes less time to prepare than spray foam.

Contractors use injection foam, known as ArmorFoam, to insulate enclosed spaces. Injection foam insulation’s texture is similar to shaving cream. Before application, injection foam must undergo the mixing of a foaming agent, water, and resin.

Injection foam does not require removing the old or existing insulation. However, the contractor may remove cellulose insulation from the walls before installing it. As a result, the injection foam will fill and spread through the entire surface. 

Spray Foam

Spray foam insulation consists of chemicals derived from petroleum extracts. The foam combines two liquids, resulting in a chemical reaction to create polyurethane foam. Professionals can install spray foam insulation in open cavities, including walls, crawl spaces, and attics.

Before applying spray foam, the contractor will remove all the old fiberglass and cellulose. Spray foam adheres well to clean surfaces and fills spaces more consistently. With spray foam insulation, you can fill every gap and crevice.

Spray foam requires more preparation time than injection foam because the contractors have to move the furniture and other household items. Then, a plastic sheet or wrap covers the flooring to prevent spray foam from getting on them.

2. Air Sealing and R-Value

R-value and air sealing are crucial factors when comparing injection foam vs. spray foam.

Both injection foam and spray foam insulation create an air seal but have different R-values. Air leaks can increase your heating and cooling bills by up to 30%.

R-value indicates how well the insulation performs, so a higher value means better insulation. Although the R-value is important, it’s not the only deciding factor.

Injection foam insulation achieves an insulation rating of R-18, depending on the cavity size. In comparison, the R-value for open-cell spray foam falls between 3.6 to 3.9 per inch. The closed-cell spray foam has an R-value of 6 and 7.

3. Open-Cell vs. Closed-Cell Foam

Injection foam consists of an open-cell structure that will not expand. In contrast, spray foam has open and closed-cell types. Injection foam works best with enclosed and existing walls, whereas spray foam is better for open walls and crawl spaces.

Unlike open-cell foam, which remains lightweight, closed-cell tends to stay stiff and dense. Since open-cell insulation can move with the foundation of the house, it’s better suited for homes. A closed-cell structure works better on pole barns with exposed walls. 

Reliable Foam Insulation Installation in Cumming, GA

Anthem Insulation & Home has over ten years of experience installing insulation. Their contractors understand the importance of insulating your home. They offer free in-home consultations to discuss your specific needs and create a solution.Hopefully, now you understand the difference between injection foam vs. spray foam. Contact Anthem Insulation & Home today for more information on professional insulation installation in Cumming, GA and to know if it’s possible to over-insulate your house.

Spray Foam Insulation

How Is Spray Foam Insulation Applied: Steps by the Professionals

You may wonder, “how is spray foam insulation applied, and how does it help?” spray foam is great for sealing holes, cracks, and gaps to reduce your energy bill. It offers resistance to water, mold, and insects, expands into hard-to-reach areas, and adds structural support.

Anthem Insulation & Home does spray foam insulation in Canton, GA, and are your insulation experts. Knowing when and where to use spray foam yourself is difficult, so getting professional help from spray foam experts can help you save on energy bills.

Locating the Leaks

It’s important to check for air leaks, usually where different materials meet or in a wall cavity. These areas include:

  • Door frames
  • Window frames
  • Baseboards
  • Electrical outlets
  • Cable TV holes
  • Phone line holes
  • Heat vents
  • Dryer vents
  • Air vents
  • Between bricks
  • Between the foundation and the walls
  • Pipes
  • Wire penetrations
  • Electric outlets
  • Air conditioning holes
  • Where pipes pass through the walls
  • Attic doors
  • Gaps in the garage

There are tips for doing it yourself, but you may want to hire a professional.

Tips for Spraying Yourself

How is spray foam insulation applied? This question can have several answers, but reading the instructions carefully is always essential. You need to cover the surrounding area with cloth or newspapers and protect yourself with gloves, a mask, and goggles.

These flexible sprays are flammable, so keep away from fires. The sealant does expand, so don’t fill the air barrier all the way, or you’ll have to trim excess foam. It’s crucial to have control of the flow, so practice before you spray.

When the foam is applied, it has to dry. If you need help insulating the attic, there is a different process.

Water Warning

Never spray sealant on a wet surface that exceeds dampness of 20%, or the chemical reaction won’t work, and the foam will not stick. If you need to spray an area with a water leak or water damage, you can use a moisture meter to determine if you can spray or not.

Anthem Insulation & Home offers open cell and closed spray wet foam for situations like this.

Replacing the Tip

You will need to install a new tip after every 30 seconds of spraying. The foam will clog inside the blowing agent if you don’t, making it useless. Kits typically have extra tips, but planning where to spray and how much to spray at once is essential.

Applying Spray Foam is Tricky

If you still wonder how is spray foam insulation applied, you are not alone. If you need spraying, call us at 770-354-5005! Anthem Insulation & Home has everything you need if you need assistance, and we can help you learn about the types of wall and floor insulation we offer!

Spray Foam Insulation

What Is Spray Foam Insulation?

When the chill of winter sets in and your furnace kicks on, you’ll see your energy bills begin to rise. Stress levels will rise as you find yourself sacrificing bigger chunks of your paycheck to your energy provider. You may even find yourself perusing the internet for warmer locations and lower energy bills.

Don’t sacrifice your home on a whim. There’s a solution to your problem, and it doesn’t require a moving van.

Something as simple as spray foam insulation can lower your energy bills and keep your home comfortable in all seasons. Keep reading to learn everything you need to know about spray foam insulation and how it can help keep you in the home you love. 

What Is Spray Foam Insulation?

Sprayfoam insulation consists of a combination of isocyanate and polyol resin. When a spray foam insulation service applies the product, it can expand to 30 to 60 times its liquid quantity. 

Spray foam works especially well around areas that you cannot use traditional fiberglass foam around. It creates a barrier that seals floors, walls, and ceiling areas from unwanted air movement. This also means you can seal the sneaky areas that leak cold air such as outlets and light fixtures. 

Spray foam works well in the open cavities of both new and existing construction. If the building has an open cavity, you can use spray foam to fill gaps, crevices, and cracks. 

Conventional insulation will eventually sag and lose its shape. It will settle in place. Spray foam maintains its shape and continues to offer the essential insulation needed for areas that seep cold air.

Energy experts recommend spray foam, especially around existing finished areas. If you have an irregularly shaped area or an obstruction that prevents traditional insulation, spray foam insulation will seal your cracks and normalize your indoor temperatures. 

Spray Foam Insulation Benefits

Spray foam offers a myriad of benefits over other types of insulation. Spray foam fits into the nooks and crannies of your home, sealing areas that traditional insulation cannot reach. 

Reduced Energy Bills

Because spray foam reaches into the nooks and crannies of your home, it will reduce the air movement and help keep your home at a stable temperature. Your HVAC system can run more efficiently if the home isn’t leaking air. 

As a result, your energy bills will drop, and your home will have a consistent temperature. Your air conditioner and furnace will no longer have to run constantly. 

Energy efficiency experts estimate that you can save as much as 15 percent on your heating and cooling bill when you properly insulate your home. This means big savings over time. The cost you put into insulation will quickly go away as you save money every month. 

More Comfortable Home

Do you have cold corners in your home? Proper spray foam insulation will keep cold air from leaking into your home in the winter. As a result, you’ll have a more comfortable home. 

Reduced Condensation

When your home has a significant temperature difference between the outside and inside of the home, condensation will form on uninsulated walls. 

Foam insulation will fill the walls and prevent condensation and the unwanted mold that results from it. Condensation won’t form because your wall now has a barrier keeping outside air separate from the inside air. 

Ice Dams

When heat seeps from your attic, it melts snow and ice. The resulting liquid runs down the roof and eventually refreezes on its way. The ice then accumulates, creating an ice dam at the end of the roof right near the gutters. 

Home repair experts claim that a properly insulated attic will prevent ice dams from forming and causing damage. 

Insulating your roof deck will keep the warm air in your home. When the warm air stays in, the snow doesn’t melt and run down your roof or create an ice dam.

Open Cell Spray Foam vs. Closed Cell Spray Foam

Spray foam comes in both open-cell and closed-cell foam. Each type of spray foam has its precise uses. 

Open Cell Spray Foam Insulation

When you use open-cell foam, you spend less but still receive a quality air seal. The cell moves with your structure as it shifts, and thus it will not crack or pull away. 

The open-cell foam also allows water to flow freely through it without soaking it up. Instead, it retains the water much like a sponge. The foam eventually dries out and does not accumulate mold. 

Technicians will use water as the blowing agent for this type of foam. It will reduce but not completely block out sound as well. 

Closed Cell Spray Foam Insulation

Closed-cell spray insulation typically works best in commercial buildings and pole barns as well as vans. It can withstand a beating by the elements better than open-cell spray foam. Thus, you can use it outdoors and not worry about rain or snow damaging it. 

Similar to open-cell spray foam, closed-cell spray foam prevents air leaks. It has a lower expansion rate than open-cell spray foam which makes it ideal for vans and smaller homes.

Stay Calm, and Foam

Spray foam insulation will reduce your energy bill and keep your home at a constant temperature. It can also reduce hazards like condensation on your wall and ice dams on your roof. 

As a whole, you need only hire a technician to treat your home with spray foam, and you’ll find you have a much more comfortable home environment. 

Are you looking for someone to evaluate your home’s insulation? We can help. We have technicians trained in all types of spray foam insulation techniques from attic insulation to the other nooks and crannies in your home. 

Our technicians will best know which type of spray foam you need. As a result, you’ll have a much better-insulated structure and a more comfortable building. 

Take some time and check out our services today. We can help insulate your home today.